Baxi Solo 2 PF Quick Start Manual download pdf (Page 26)

5.0 Installation

5.15 Internal Fitting Kit (Cont)

6. Refit the end piece to the liner and open out to

the thickness of the wall. Seal the two pieces

together using the tape provided with the kit

(Fig 64).

7. Slide the assembled wall liner into the hole in

the wall until the tags stop against the inner wall

with the seam of the liner uppermost. Mark the

positions of the holes in the tags on the wall and

then rotate liner so that tags reveal marks

(Fig. 65).

8. Drill and plug the wall in these positions

(Fig. 66).

9. Rotate liner back until the tags align with the

holes drilled and secure it to the wall using

suitable screws (Fig. 67).

10. Make good between the edge of the liner

and the outside wall with cement mortar or a

similar substance, by reaching through the liner

and pressing the mortar between liner and the

outside brick work (Fig. 68). Make good between

the liner and the inside wall. Apply soap solution

to the ‘O’ ring inside the liner.

11. The rest of the installation may now proceed

as described.

Fig. 64

Fig. 65

Fig. 66

Fig. 67

Fig. 68

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

No comments

Baxi Solo 2 PF Quick Start Manual Page 26