Baxi Solo 2 PF Quick Start Manual download pdf (Page 35)

9.0 Annual Servicing

9.1 Dismantling the Boiler

1. To ensure its continued safe and efficient

operation, it is important that the appliance is

regularly serviced. ( For location of British Gas

service test point see Changing Components

section of these instructions).

2. Before servicing the boiler please read Section

1.3 Important Information.

3. Isolate the electrical supply to the boiler.

4. Remove the outer case lower door panel by

following the sequence of diagrams (Fig. 89).

5. Remove the outer case from the boiler by

unscrewing the two screws and lift the case clear

(Fig. 90).

6. Release the four latches holding the

combustion box door (Fig. 91). Remove the

combustion box door by pulling forward from the

bottom and unhooking its top edge (Fig. 93).

7. Release the 5-pin electrical plug connecting the

pressure switch and fan (Fig. 92). Withdraw the

fan assembly by pulling forwards from the top

edge (Fig. 93).

Fig. 89

Fig. 90

Fig. 91

Fig. 92

Fig. 93

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

No comments

Baxi Solo 2 PF Quick Start Manual Page 35