Baxi Solo 2 PF Quick Start Manual download pdf (Page 13)

5.0 Installation

5.1 Initial Preparation

1. Unpack contents of carton.

2. Remove the lower door panel from the outer

case. Remove the 2 screws holding the outer

case to the combustion box.

3. Place the ready assembled outer case in a

safe place until required.

4. Release the R clips from the two latches

securing the combustion box to the back plate

and release the latches (Fig. 14).

5. Lift and remove the combustion box from the

back plate (Fig. 15). Place the combustion box

on its back.

IMPORTANT - When installing a Solo 2 with

a rear flue see section 5.2 before continuing

the installation.

6. Proceed to the relevant section for flueing the

appliance either to the Rear, Left, Right or

Vertically.

NOTE: For Vertical flueing or flue lengths

above the standard 610mm (24 in) the

relevant optional extra kits must be obtained

and their instructions followed.

Fig. 14

Fig. 15

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Baxi Solo 2 PF Quick Start Manual Page 13