Baxi Solo 2 PF Quick Start Manual download pdf (Page 25)

5.0 Installation

5.15 Internal Fitting Kit

1. The internal fitting kit (available from

merchants free of charge quoting Baxi Part

. 226441) is suitable for walls between 100mm

(4in) and 280mm (11in) in thickness.

2. TO INSTALL THE KIT - Mark the flue hole

centre as described in section 5.4 or 5.8. Cut a

hole in the masonry approximately 117mm (4

in) diameter for the internal fitting kit. The use of

a core drill is recommended. (When using a core

drill, it is important to keep the drill level and

square).

3. Measure the wall thickness and from this

dimension subtract 10mm (

in) (Fig. 61).

4. Remove the wall liner from its packing and

remove the end piece (Fig. 62).

5. Mark off the dimension, wall thickness - 10mm

(

in), measuring from the beaded end of the

duct and cut off the remaining length of the duct.

Ensure that the cut is square and reasonably

straight (Fig. 63).

Wall Thickness - 10

Wall Thickness

Fig. 61

Fig. 62

Fig. 63

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

No comments

Baxi Solo 2 PF Quick Start Manual Page 25