Baxi Solo 2 PF Quick Start Manual download pdf (Page 4)

1.0 Introduction

4 1

STANDARD

B.S. 6891

B.S. 5546

B.S. 5449

B.S. 6798

B.S. 5440: Pt 1

B.S. 5440: Pt 2

SCOPE

Gas Installation.

Installation of hot water supplies for

domestic purposes.

Forced circulation hot water systems.

Installation of gas fired hot water

boilers.

Flues.

Ventilation.

HEAT OUTPUT

Model Min Max

30 5.86kW (20,000 Btu/h) 8.79kW (30,000 Btu/h)

40 9.09kW (31,000 Btu/h) 11.72kW (40,000 Btu/h)

50 12.02kW (41,000 Btu/h) 14.65kW (50,000 Btu/h)

60 14.95kW (51,000 Btu/h) 17.58kW (60,000 Btu/h)

70 17.88kW (61,000 Btu/h) 20.5kW (70,000 Btu/h)

80 20.8kW (71,000 Btu/h) 23.45kW (80,000 Btu/h)

B.S. Codes of Practice

1.1 Description

1. The Baxi Solo 2 PF is a gas fired room sealed

fan assisted central heating boiler with range rated

outputs as shown in the table below

2. Each appliance is preset at a MID

RANGE heat

input rating and is designed for use on NATURAL

GAS only.

3. All boilers are suitable for fully pumped open

vented central heating and domestic hot water

systems and sealed systems.

4. The appliance data badge is fitted to the

combustion box door.

1.2 Installation

1. The appliance is suitable for installation only in

G.B. and I.E. and should be installed in

accordance with the rules in force. For Ireland

install in accordance with I.S.813 “I

NSTALLATION OF

GAS APPLIANCES”. The installation must be carried

out by a CORGI Registered Installer or other

competent person and be in accordance with the

relevant requirements of G

AS SAFETY (Installation

and Use) R

EGULATIONS, the BUILDING REGULATIONS

(Scotland) (Consolidation), the LOCAL BUILDING

REGULATIONS, the CURRENT I.E.E. WIRING

REGULATIONS and the bye laws of the Local Water

Undertaking. Where no specific instructions are

given, reference should be made to the relevant

BRITISH STANDARD CODES OF PRACTICE.

2. All systems must be thoroughly flushed and

treated with inhibitor (see Section 3.1).

1.3 Important Information

This product contains Refractory Ceramic Fibres

(R.C.F.) which are man-made vitreous silicate

fibres. Excessive exposure to these materials may

cause tempory irritation to eyes, skin and

respiratory tract. Care must be taken when

handling these articles to ensure the release of

dust or fibres is kept to a minimum.

To ensure that the release of fibres from these

articles is kept to a minimum, during installation

and servicing it is recommended that a H.E.P.A.

filtered vacuum is used to remove any dust, soot

or other debris accumulated in and around the

appliance. This should be performed before and

after working on the installation.

It is recommended that any replaced item(s) are

not broken up but sealed within heavy duty

polythene bags and clearly labelled “R.C.F.

waste”. This is not classified as “hazardous waste”

and may be disposed of at a tipping site licensed

for the disposal of industrial waste.

Protective clothing is not required when handling

these articles but it is recommended that gloves

are worn and the normal hygiene rules of not

smoking, eating or drinking in the work area are

followed and always wash hand

s before eating or

drinking.

1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments