Baxi MainEco Heat 15 Service Manual download pdf (Page 44)

44 MainEco Heat 7215845 - 01 (08/14)

7 Commissioning

7.6 Final Instructions

1. Carefully read and complete all sections of the Benchmark

Commissioning Checklist at the rear of this publication that are

relevant to the boiler and installation. These details will be

required in the event of any warranty work.

2. The publication must be handed to the user for safe keeping

and each subsequent regular service visit recorded.

3. Hand over the User’s Operating, Installation and Servicing

Instructions, giving advice on the necessity of regular servicing.

4. For IE, it is necessary to complete a “Declaration of

Conformity” to indicate compliance with I.S. 813. An example of

this is given in I.S. 813 “Domestic Gas Installations”. This is in

addition to the Benchmark Commissioning Checklist.

5. Instruct the user in the operation of the boiler controls. Hand

over the User’s Operating, Installation and Servicing

Instructions, giving advice on the necessity of regular servicing.

6. Demonstrate to the user the action required if a gas leak

occurs or is suspected. Show them how to turn off the gas

supply at the meter control, and advise them not to operate

electric light or power switched, and to ventilate the property.

7. Show the user the location of the system control isolation

switch, and demonstrate its operation.

8. Advise the user that they may observe a plume of vapour

from the flue terminal, and that it is part of the normal operation

of the boiler.

9. Complete the label supplied with the inhibitor and stick to the

inside of the boiler case. Detail of system treatment must be

recorded in the Benchmark Commissioning Checklist.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

No comments

Baxi MainEco Heat 15 Service Manual Page 44