Baxi EcoBlue Advance Heat Owner's Manual download pdf (Page 25)

7212293-01 (06/14) EcoBlue Advance Heat 25

Troubleshooting 8

8.2 Fault Finding

1. If the boiler is not working, check section 5.1 Operation Checking Procedure & Basic Fault

Identification or the fault finding table. Contact your Installer.

Problem

There is no domestic hot water

and/or the radiators are cold.

The boiler is not working.

The domestic hot water is not

hot enough.

The radiators are not hot

enough.

Possible Causes

Check that the boiler is being supplied with power

(all controls set to ON).

Check the fuses and the switches.

If possible check whether the gas cock is properly

open.

If the property has a prepayment meter ensure it

has sufficient credit.

Check if the Fault - Lock-out is illuminated. See

Section 8.1 to reset.

The boiler temperature setting is below the

cylinder thermostat setting.

The radiator valves are not open.

The temperature set point for the heating is too

low (check boiler & room thermostat).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Baxi EcoBlue Advance Heat Owner's Manual Page 25