Baxi EcoBlue Advance Heat Owner's Manual download pdf (Page 10)

10 EcoBlue Advance Heat 7212293-01 (06/14)

2 Safety

2.2 Recommendations

CAUTION

Only qualified professionals are authorised to work

on the appliance and the installation.

For sealed systems regularly check the water

pressure in the system (recommended pressure is

1.5 bar). Your installer will advise on the method of

repressurising if required.

Keep the appliance accessible at all times.

Do not remove or cover the serial number label

affixed to the slide-out flap at the boiler lower left.

It must remain legible throughout the

lifetime of the appliance.

2.2.1 Benchmark Commissioning Checklist

1. Please ensure that the installer has fully completed the

Benchmark Checklist on the inside back pages of the installation

instructions supplied with the product and that you have signed it

to say that you have received a full and clear explanation of its

operation. The installer is legally required to complete a

commissioning checklist as a means of complying with the

appropriate Building Regulations (England and Wales).

2. All installations must be notified, by the installer, to Local Area

Building Control either directly or through a Competent Persons

Scheme. A Building Regulations Compliance Certificate will then

be issued to the customer who should, on receipt, write the

Notification Number on the Benchmark Checklist.

3. This product should be serviced annually to optimise its

safety, efficiency and performance. The service engineer should

complete the relevant section of the Benchmark Service Record

in the Installation & Service manual after each service.

4. The completed Benchmark Checklist & proof of annual

servicing (where applicable) will be required in the event of any

warranty work.

See Section 12 for warranty information.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Baxi EcoBlue Advance Heat Owner's Manual Page 10