Baxi Solo 2 RS Quick Start Manual download pdf (Page 24)

Loosen the securing screw sufficiently for the electrical

cover to be removed from the thermostat box.

Bare back the input cable to the

dimensions shown.

Fit the electrical input cable as follows:

Connect the switched live to the terminal

marked S/L.

Connect the permanent live to the

terminal marked P/L.

Connect the supply neutral to the

terminal marked N and the supply earth

to the terminal marked .

Secure the cable in place with the right

hand cable clamp.

Fit the pump outlet as follows:

Connect the pump earth to the

terminal marked .

Connect the pump neutral

to the terminal marked N.

Connect the pump live

to the terminal marked

Secure the cable in

place with the left hand

cable clamp.

Replace the electrical cover

and securing screw.

A cable clip is supplied in the kit to

secure the cable to the bottom of the combustion box.

In the event of an electrical fault after installation of the

appliance, preliminary electrical system checks should

be carried out:- earth continuity, polarity and resistance

to earth.

g/y

S/L

P/L

L N

S/L N

Pump

L N

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

Baxi Solo 2 RS Quick Start Manual Page 24